Moser 1884 Traducción Del Manual De Uso Original página 12

ENGLISH
Operation
de
Preparation
Keep the packaging material for safe storage or
transport later.
en
f Check that the contents are complete.
f Check all the parts for possible transport damage.
fr
Safety
it
Handle with care! Damage due to incorrect power
supply.
f Only operate the appliance with an alternating cur-
es
rent and with the voltage stated on the nameplate.
Charging the battery
pt
1. Connect the appliance plug (Q) on the plug-in transformer
to the charging stand socket (H) (Fig. 4ⓐ).
nl
· The appliance can also be connected directly to
the plug-in transformer for charging (Fig. 2ⓐ/ⓑ).
· Battery overcharging is prevented thanks to intel-
sv
ligent charge management.
2. Connect the plug-in transformer to the mains socket
no
(Fig. 4ⓑ).
3. Switch off the appliance using the on/off switch (Fig. 3).
4. Place appliance in the charging stand (Fig. 4) or connect
fi
directly to the plug-in transformer (Fig. 2ⓐ/ⓑ). The charg-
ing process starts.
tr
· During the charging operation, the LED display on
the on/off switch flashes green. The charge status
of the battery is displayed by corresponding bars
pl
on the battery power indicator (C). When the bat-
tery is fully charged, all bars on the battery power
indicator and LED display on the on/off switch are
cs
illuminated.
· After the appliance has been removed from the
charging stand, the display goes out after approx.
sk
15 seconds (power saving mode).
· The accuracy of the battery power indicator (C)
can be increased by fully discharging the battery
hu
from time to time and then recharging it in one
uninterrupted charging process.
· It takes approx. 45 minutes for the appliance to
sl
charge to full capacity.
5. As soon as the battery is fully charged, all bars on the bat-
ro
tery power indicator and LED display on the on/off switch
are illuminated.
bg
Battery operation
1. Switch on the appliance using the on/off switch and switch
ru
off after use (Fig. 3).
· After the appliance has been switched off, the
uk display goes out about 15 seconds later (power
saving mode).
· When the battery is fully charged, the appliance
can be used for up to 75 minutes without mains
el
connection.
ar
12
All manuals and user guides at all-guides.com
· The charge status of the battery is displayed by
the battery power indicator (C).
· In case of insufficient maintenance of the
blade set, the operating time can be reduced
considerably.
Mains operation
1. Connect the appliance plug (Q) on the plug-in transformer
to the appliance socket (E) (Fig. 2ⓐ).
2. Connect the plug-in transformer to the mains socket
(Fig. 2ⓑ).
3. Switch on the appliance using the on/off switch and switch
off after use (Fig. 3).
Operation
Setting the cutting length
The cutting length can be adjusted to between 0.7 mm and 3
mm (5 possible positions) using the cutting-length adjustment
integrated into the blade set (Fig. 5).
Cutting with the attachment comb
The appliance can also be operated with attachment combs.
f In order to achieve the indicated cutting length, the cutting
length adjustment lever should be set to position 1 (Fig. 5).
Depending on the model, the following attachment
combs are included as standard:
3 mm, 6 mm, 9 mm and 12 mm, 18 mm and 25 mm
cutting lengths.
Attaching/removing the attachment comb
1. Slide the attachment comb on to the blade set in the direc-
tion of the arrow until it reaches the limit stop (Fig. 6ⓐ).
2. The attachment comb can be removed by pushing it in the
direction of the arrow (Fig. 6ⓑ).
Maintenance
Cleaning and care
Danger! Electric shock due to penetration of
liquid.
f Switch the appliance off and disconnect from
the power supply before you start with cleaning
and care.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
f Only reconnect the appliance to the power supply
if it is completely dry.
Handle with care! Danger from aggressive
chemicals.
Aggressive chemicals could damage the appliance
and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
mended by the manufacturer.