Stroller Assembly; Attach Handles; Unfold The Stroller Frame; Attach Front Wheels - CYBEX ONYX 2011 Manual Del Propietário

Stroller assembly

attach Handles

1. Lay stroller down with the back
of the stroller facing up.
2. With the locking tab facing you,
slide handle into recepticle. Push in
locking tab and push Handle in
until it makes an audible CLICk.

Unfold the Stroller Frame

peRFORm the following steps on a
CaRpeTed surfrace to avoid damage to
flooring.
keep CHiLdReN aWaY from stroller when
folding and unfolding.
1. Hold the stroller upright by the handles.
2. Release the Automatic Frame Lock.
3. Push the Primary Fold Lock downward
with your foot until it locks into place.
4. Turn stroller on its left side.

attach Front Wheels

Push each Front Wheel onto the metal axle
until it makes an audible CLICk.
4
CliCk
CliCk

attach Rear Wheels

1. Identify the right Rear Wheel unit
(the one with the brake pedal.)
2. With the pedal towards the rear of the
stroller, slide unit onto right rear tubing.
3. While pushing in nib spring, push
unit until nib spring locks it into
place. Repeat for left side.
4. Slide brake cable into frame clips.
eNSURe that all wheels are securely
attached before using stroller.

attach Super Canopy™

1. Slide Canopy clips onto the stroller
frame, making sure the front of the
canopy faces the front of the stroller.
2. Extend the Canopy and place the back
flap of canopy behind the seat.
Stroller assembly
5