Survivor SRV-2 Guia De Inicio Rapido página 6

NFC-enabled device directly over the NFC logo on the
SURVIVOR SRV-2 speaker. Hold it in place until you see a
prompt on your device asking you if you want to pair to
the SURVIVOR SRV-2 speaker. You may need to adjust the
positioning of the device on the NFC logo to ensure the
device's internal NFC transmitter aligns with the SURVIVOR
SRV-2 speaker's internal NFC receiver.
NOTE: If your SURVIVOR does not have an active
Bluetooth connection and is left on, it will shut itself off
®
after 30 minutes to preserve the battery. To restart your
SURVIVOR you will need to press and hold the power
button for 2-3 seconds.
PAIRING TWO TOGETHER –
2
WIRELESS STEREO-PAIRING
Want even bigger sound? If you have two SURVIVOR SRV-2 units
(yeah, you should probably get two), you can pair them together
for left and right stereo using "True Wireless" technology. Here's
how you do it:
First be sure to disconnect all Bluetooth
your device and remove any previously paired SURVIVOR SRV-2
speakers from your device.
Next, press and hold the battery check button on both SURVIVOR
speakers for 5 seconds until you hear a sonar sound from both
speakers. Within 30 seconds, a second beep will indicate a True
Wireless connection between the SURVIVOR SRV-2 speakers.
connections (if any) on
®