Emmaljunge Viking Manual De Instrucciones página 56

Assembly and usage of chassis
11
15
14
12
16
13
14
56
All manuals and user guides at all-guides.com
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the chassis
• Start by making sure that the brake is engaged.
• Lower the backrest/seat unit into its lowest position by pulling the
backrest lever and lowering the seat unit down to it's lowest posi-
tion before it is folded.
IMPORTANT!
• The backrest/seat unit should always be in its lowest position (fully
reclined) before the pram is folded. Please note! The lowest recline
position should only be used when folding the stroller.
• When folding: Make sure the Adjustable Comfort System is set in
the highest position to avoid pressure marks on the rear wheels
while the chassis is in the folded position.
• Ensure the front wheels are in the swivel position by pulling the
locking rings up.
• Fold the chassis by first pressing in the buttons (14) at the same
time and pull the two main locking devices, one on each side up-
wards (15).
• Lift the secondary locking device (16) and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap's release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.
WARNING
• Never pull a pram with swivel front wheels behind you. The pram
might self turn which can lead to a safety risk if you are not cautious
and attentive.
Transport clip
A transport clip is attached to the chassis.
• Fold the chassis and snap the clip over the chassis frame to secure
it in place.
Viking v. 2.8