Descargar Imprimir esta página

Charger Operation - SNOWJOE SUNJOE iON100V-16ST-CT Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

LED light
(iON100V-5AMP batteries only – sold
separately)
The iON100V-5AMP battery is equipped with a 0.35 watt LED
light located on the handle, which is good for camping and
emergency illumination. To turn on the LED light, open the
carry handle, and press the battery push button twice in a row.
To turn off the LED light, press the battery push button twice
again (Fig. 11).
NOTE: This function only comes with iON100V-5AMP battery.
iON100V-2.5AMP battery is not equipped with the handle or
the LED light.
Fig. 11
LED light
Push twice to turn
on/off

Charger Operation

TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this string trimmer, you will need to
additionally purchase either the iON100V-2.5AMP or
iON100V-5AMP lithium-ion battery and the 100 V quick
charger (model iON100V-RCH). Battery and charger options
available at sunjoe.com.
m
WARNING!
Charge only the iON100V-2.5AMP or
the iON100V-5AMP lithium-ion battery packs in compatible
iON100V-RCH battery charger. Other types of batteries may
cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON100V Lithium-
iON Batteries
NOTE: The iON100V-2.5AMP and iON100V-5AMP lithium-ion
battery packs do not develop a "memory" when charged after
only a partial discharge. Therefore, it is not necessary to run
down the battery pack before placing it into the charger.
• Use the battery charge indicator lights to determine when to
charge your iON100V-2.5AMP and iON100V-5AMP lithium-
ion battery packs.
• You can "top-off" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery
1. Push the battery releasing button on the string trimmer
to release the battery pack. Pull the battery out of the
equipment. (Fig. 12).
Fig. 12
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, insert the
charger's plug into the electrical wall outlet. When you
plug in the charger, the red light will illuminate steadily
(Fig. 13).
Fig. 13
10
Battery
releasing
button
Battery pack
Red

Publicidad

loading