Publicidad
Idiomas disponibles
Idiomas disponibles
Indication
• Red Light – Steady
• Green Light – Off
• Red Light – Off
• Green Light – Slowly
flashes
• Red Light – Off
• Green Light – Steady
• Red Light – Off
• Green Light – Rapidly
flashes
• Red Light – Slowly
flashes
• Green Light – Off
• Red Light – Rapidly
flashes
• Green Light – Off
Operation
Starting + Stopping
Before you start the unit, make sure the trimmer is not
contacting any object.
1. Align the ribs of the battery pack with the battery-
mounting slots in the string trimmer. Slide the battery
pack in until it snaps into position (Fig. 16).
Possible Cause
(Solution)
• No load charging –
There's no battery inserted
in the charger.
• Normal charging – The
battery is being charged.
• Fully charged – The battery
is fully charged and the
charging process is finished.
• Discharged – The battery is
heavily discharged. It may
take longer to charge.
• Temperature abnormal –
Charging process will start
when battery returns to
normal temperature.
• Over current charging –
The current coming through
the charger is greater
than what the charger can
support. Stop charging as
soon as possible.
• Abnormal performance
– Something is wrong with
the battery or the charger.
Contact Snow Joe
+ Sun
®
Joe
customer service at
®
1-866-SNOWJOE (1-866-
766-9563).
IMPORTANT! Make sure that the latch in the battery
compartment snaps into place and the battery pack is secured
to the tool before beginning operation.
Fig. 16
Latch
Battery compartment
2. Press the safety button down (on either side) and hold
it in the position. Press the On/Off switch to turn on the
string trimmer. Release the safety button and continue to
squeeze the On/Off switch for continued operation
(Fig. 17).
Fig. 17
On/Off
switch
Safety lock
button
3. Using the speed adjusting switch to adjust the rotation
speed of the motor. The unit is equipped with 3 speeds
(Fig. 18).
Fig. 18
Speed
adjusting
switch
12
Battery pack
Low: 4300 ± 10% rpm
High: 5000 ± 10% rpm
Turbo: 6000 ± 10% rpm
Publicidad
