Air Filter - Hoshizaki HRE-70B Manual De Instrucciones

Polishing powder, alcohol, thinner, benzine, acidic
or alkaline detergent, hot water, petroleum, soap
powder, metal scourer or brush, etc.
Especially detergent to clean grease on ventilator
or microwave.
Fig. 10
Note: Some solutions other than the above may
also damage painted or plastic surfaces.
Immediately stop using such solutions if
they cause any problems.
* The door basket and its contact surface get
soiled easily. Clean every surface of these parts
thoroughly. Remnants of food will accelerate aging.
* Use a cloth to wipe off any water staying inside the
cabinet.

2. AIR FILTER

IMPORTANT
To prevent deformation, do not wash the air
filter with hot water above 40°C.
A plastic mesh air filter removes dirt or dust from the
air, and keeps the condenser from getting clogged.
As the filter gets clogged, the refrigerator/freezer's
performance will be reduced. Check the filter at least
twice a month. When clogged, use warm water and
a neutral cleaner to wash the filter. Do not operate
the unit with the air filter removed, or the condenser
will get clogged, resulting in failure.
1) Open the front panel and remove the air filter. To
prevent injury, do not touch the condenser fins
directly.
Fig. 11
Air Filter Front Panel
2) Wash the air filter carefully with cold or warm
water containing the proper amount of neutral
cleaner. Rinse and dry the air filter thoroughly.
3) To refit the air filter, attach it to the guide at the top
of the condenser and put the tabs into the slots in
the refrigeration unit base.
Guide
Air Filter
IV. BEFORE CALLING A SERVICE AGENT
IMPORTANT
1. If the temperature display window on the
operation panel indicates an error code
or something seems wrong with the unit,
check for possible causes according to the
following instructions. If the problem still
exists, immediately contact an authorized
Hoshizaki service company.
2. When contacting a service company, let them
know the model name, serial number, date of
installation (see warranty card) and state of
the trouble.
3. Do not attempt to repair the unit yourself.
1. TROUBLES WITH ERROR CODE
INDICATION
Code Problem and Possible Cause
E1 Cabinet temperature too high.
(1) Ambient temperature too high (above
43°C).
(2) Warm or hot foods inside.
(3) Door(s) left open.
E2 Cabinet temperature too low.
(1) Ambient temperature too low (below
5°C).
(2) Frozen foods being defrosted.
E3 Defrost error. Immediately contact an
authorized Hoshizaki service company.
7
ENGLISH
Base
Slot
Fig. 12