All manuals and user guides at all-guides.com
Safety instructions
Do not store any explosive substances such as spray cans with
a flammable propellant in the device.
CAUTION!
!
Disconnect the device from the power supply
– before each cleaning and maintenance
– after every use
Food may only be stored in its original packaging or in suitable
containers.
NOTICE!
A
Check that the voltage specification on the type plate
corresponds to that of the energy supply.
Only connect the device as follows:
– With the DC cable to a DC plug socket in the vehicle (e. g.
cigarette lighter)
– Or with the 230 V connection cable to the 230 V AC mains
supply
Never pull the plug out of the socket by the cable.
If the cooler is connected to the DC socket: Disconnect the
cooler and other power consuming devices from the battery
before connecting the quick charging device.
If the cooler is connected to the DC socket: Disconnect the
cooler or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
The cooling device contains inflammable cyclopentane in the
insulation. The gases in the insulation material require special
disposal procedures. Deliver the device at the end of its life-
cycle to an appropriate recycling.
2.2
Operating the device safely
CAUTION!
!
Before starting the device, ensure that the power supply line
and the plug are dry.
18
PB266, PB306
EN