Troubleshooting; Disposal - Dometic GROUP WAECO CoolFun PB 266 Instrucciones De Uso

All manuals and user guides at all-guides.com

Troubleshooting

7 Troubleshooting
Fault
Your device is not
working (plug is
inserted).
When operating from
the DC power socket:
The ignition is on and
the cooler is not
working.
8

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
24
Possible cause
There is no voltage
flowing from the DC
power socket in your
vehicle.
PB306 only: No volt-
age present in the AC
voltage socket.
The inner fan or the
cooling element is
defective.
The fuse of the DC
power socket is dirty.
This results in a poor
electrical contact.
The fuse of the DC plug
has blown.
The vehicle fuse has
blown.
Suggested remedy
The ignition must be switched on in most
vehicles to supply current to the DC power
socket.
Try using another plug socket.
This can only be repaired by an authorised
repair centre.
If the plug of your cooler becomes very
warm in the DC power socket fitting, either
the fitting must be cleaned or the plug has
not been assembled correctly.
Replace the fuse of the DC plug with one of
the same rating.
Replace the vehicle's DC power socket
fuse (usually 15 A). Please refer to the
operating manual of your vehicle.
PB266, PB306
EN