Installation On Head Magnifier; Attaching The Control Unit - SCHOTT EyeMag Light II Manual Del Usuario

48
5.3. Installation on
GB
head magnifier
5.4. Attaching the
control unit
All manuals and user guides at all-guides.com
Different adapters allows you to attach the LED headlamp
to the head magnifiers.
CAUTION!
The adapters will become hot during usage. Please
ensure that the adapter is cooled prior to an exchange
of the adapter.
• Slip the LED headlamp onto the choosen adapter from
the front. It must engage with an audible click and not
come off again unless you press the release button (see
fig.2) on the LED headlamp.
• To detach the LED headlamp from the adapter, press the
release button (see fig. 2) and pull the lamp to the front
and off.
• The control unit comes with a belt clip. We recommend
that you attach the power supply unit to your belt so
that you can control the device in the most efficient way
during the application.
• The belt clip is detachable. To do so, spread the grey
carrier slightly apart and pull the belt clip off.
Ensure in this case that you can comfortably operate
the control unit.