Operation - SCHOTT EyeMag Light II Manual Del Usuario

50

5.6. Operation

GB
All manuals and user guides at all-guides.com
• Plug the power supply cable into the power supply
port. If the cable is not plugged in or not inserted all the
way, the indicator LED on the control unit will be
flashing green.
• To switch on the LED illumination device, press the
ON/OFF button. The LED illumination device will come
on at the highest level of intensity.
• Pressing the ON/OFF button several times will trigger
the following sequence:
- 100 % lighting intensity
- 66 % lighting intensity
- 33 % lighting intensity
- Light off
Pressing the button again will cause the sequence to start
over. The function indicator is switched on indicating
the charging status when the unit passes through these
conditions.