User Servicing Instructions - Vornado ALCHEMY VFANPA Manual De Instrucciones

unplug. Do not use gasoline, thinners,
solvents, ammonias or other chemicals
for cleaning. Refer to the CLEANING
instructions provided.
• Do not open appliance housing while product
is plugged in. To avoid risk of shock, all
service and/or repairs must be done by
a Vornado Authorized Service Center.
• This product may have an overload protection
(fuse) located in the plug. A blown fuse
indicates an overload or short-circuit. If
the fuse blows, follow these instructions to
replace and reinstall the safety device:

USER SERVICING INSTRUCTIONS

1. Using the product controls, turn off
the appliance.
2. Grasp the plug (not the cord) and
disconnect from the outlet.
3. Risk of Fire. Replace fuse only with
2.5 Amp, 125 Volt fuse as approved
by Vornado Consumer Service. For an
authorized replacement fuse, please
6 English
contact Vornado Consumer Service.
4. Once the replacement is received,
use a small flat-head screwdriver to
slide open the fuse cover (located
on the plug) (See Fig. A).
5. Remove fuse by using the screwdriver
to gently lift each end of the fuse
(See Fig. B).
6. Install the replacement fuse by using
the screwdriver to gently push each
metal end of the fuse into the receptacle
one at a time. Do not push on the
center of the fuse—it is fragile and
may break.
7. Slide the fuse cover closed using
the screwdriver. When closed, the
cover should fit completely in the
plug. No part of the cover should
stick out (See Fig. C).
8. Plug your appliance into the outlet
and turn the power on.
9. If the replacement fuse blows, a
short-circuit may be present and the
product should be discarded or returned
to an authorized service facility for
examination and/or repair.
Fig. A Fig. B
FCC CONSUMER ADVISEMENT
This equipment may generate, use and/or
radiate radio frequency energy that may cause
harmful interference to radio communications. If
this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to contact Vornado
Consumer Service. Changes or modifications
to this unit not expressly approved by the
party responsible for compliance could void
the user's authority to operate the product.
Fig. C