Component Locations - Kohler K-142 Manual De Instrucciones

COMPONENT LOCATIONS

SPRAY ASSEMBLY
Remove the spray head and flange
S
from the shank.
Thread the nut and washers to the
S
bottom of the shank.
From the underside of the bidet, insert
S
the shank up through the bidet spray
hole.
From the top of the bidet, thread the
S
flange onto the shank.
Thread the spray head as far as it will
S
go onto the shank, and thread the
flange until it is snug against the spray
head.
Wrench-tighten the nut on the shank.
S
LIFT ROD ESCUTCHEON
Apply a bead of plumbers putty around
S
the underside of the escutcheon.
Insert the escutcheon through the hole
in the bidet.
Assemble the washer (tapered side
S
up), brass washer, and nut to the
escutcheon.
Wrench-tighten the nut.
S
Remove any excess plumbers putty.
S
1010448-2-D
Bidet
Nut
2
Spray Head
Flange
Shank
Rubber
Washer
Metal Washer
Escutcheon
Apply Plumbers
Putty
Washer
Brass Washer
Nut
Kohler Co.