Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
English
Product-specific safety instructions
• If monitors are used which exceed the permitted total weight,
this may result in damage or injury.
• The load-bearing surfaces, e.g. tabletops, must be able to se-
curely bear the total weight of monitors and all additional com-
ponents.
Explanation of symbols
• Signs and symbols must not be removed or covered.
Read and observe the user manual before starting to use
the product.
You must only use the product in dry indoor rooms.
Your product in overview
▶ siehe Abbildung 1
Note:
Table mount depends on the product variant.
1.
VESA plate for mounting monitor
2.
Swivel joint
3.
Monitor arm
4.
Arm bracket
5.
Table column
6.
Table-top mounting table clamp (product variant # 5087)
7.
Clamping screw (product variant #5087)
8.
Table-top mounting with cable hole (product variant #5088)
9.
Pressure plate (product variant #5088)
10. Clamping screw (product variant #5088)
11. Slot nut of arm bracket
12. Adjusting screw of monitor arm
13. Clamping screw of monitor mount
26
Publicidad
Tabla de contenido
