Scope Of Delivery; Parts Overview - Bresser MyTime Travel Instrucciones De Uso

may result in malfunction, shorter electronic life span,
damaged batteries and distorted parts.
Use only the recommended batteries. Always replace
weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from different
brands or with different capacities. Remove the batteries
from the unit if it has not been used for a long time.
The manufacturer is not liable for damage related to
improperly installed batteries!

SCOPE OF DELIVERY

Main unit (A), remote sensor (B), instruction manual
Required batteries (not included with purchase):
4 pieces of micro batteries (1.5V, type AAA)

PARTS OVERVIEW

Main Unit (Fig. 2+3)
(1) Display – The display facilitates easy reading of
temperature trend, indoor and outdoor humidity,
indoor and outdoor temperature, current time
and date.
(2) DOWN button – The 'down' button decreases
All manuals and user guides at all-guides.com
(Fig. 1)
the value of a setting. Toggle between °C and °F.
Press and hold for 2 seconds to set values for
highest and deepest temperature alert.
(3) UP button – The 'up' button increases the value of
a setting. Allows to switch between MIN and MAX
values. Press and hold for 2 seconds to initialize
receiving DCF77 RC signal.
(4) SET button – The 'set' button enters the setting
mode for time and date.
(5) ALARM button – The 'alarm' button enters the
setting mode for alarm time.
(6) CHANNEL button – Press 'channel' repeatedly to
successively display the temperature information
of the different remote sensors (optional: up to 3
outdoor sensors can be connected). Press and
hold for 2 seconds to initialize transmission of the
RC signal from the remote sensor.
(7) SNOOZE/LIGHT button – Press this button to
turn on the background lighting or to interrupt the
alarm.
(8) Battery compartment
(9) Table stand – Foldable. Add if station is to be
placed on a flat surface.
DE
GB
FR
IT
ES
15