Titan Impact 440 Instrucciones De Uso página 5

Impact 440
All accessories must be rated at or above
•
the maximum operating pressure range of
the sprayer. This includes spray tips, guns,
extensions, and hose.
hAZArD: hIgh preSSure
hoSe
The paint hose can develop leaks from
wear, kinking and abuse. A leak can
inject material into the skin. Inspect
the hose before each use.
preveNTIoN:
Avoid sharp bending or kinking of the high-
•
pressure hose. The smallest bending radius
amounts to about 20 cm.
• Do not drive over the high-pressure hose.
Protect against sharp objects and edges.
Replace any damaged high-pressure hose
•
immediately.
Never repair defective high-pressure hoses
•
yourself!
Electrostatic charging of spray guns and the
•
high-pressure hose is discharged through
the high-pressure hose. For this reason the
electric resistance between the connections
of the high-pressure hose must be equal to or
lower than 1MΩ.
For reasons of function, safety and durability
•
use only original Titan high-pressure hoses.
Before each use, check all hoses for cuts,
•
leaks, abrasion or bulging of cover. Check
for damage or movement of couplings.
Immediately replace the hose if any of
these conditions exist. Never repair a paint
hose. Replace it with another earthed high-
pressure hose.
Make sure power cord, air hose and spray
•
hoses are routed in such a manner to minimize
slip, trip and fall hazard.
safety precautions
5