DURABLE 5089 Traducción Del Manual Original página 31

– Insert the cable into the enclosed cable clamps (11) as shown.
– Secure the cable clamps (11) on the swivel arm (4) as shown.
Operation
– Place the monitor in the desired position.
Rotating range
▶ see figure 10 for # 5089
▶ see figure 21 for # 5090
Swivel range for # 5090
▶ see figure 21
WARNING!
Risk of product damage!
Do not move the swivel arm against the resistance in the
swivel joint.
Height adjustment for # 5090
▶ see figure 22
– Adjust the brake/spring effect of the height adjustment with the
adjusting screw (4) in such a way that the swivel arm with the
monitor attached neither sags, nor springs upwards.
WARNING!
Risk of product damage!
Do
construction-dependent resistance.
Exchanging monitor
▶ see figure 11 for # 5089
▶ see figure 23 for # 5090
– Remove the cable clamps (11) and monitor cable.
– Lift the monitor slightly to relieve the clamps.
not move the swivel
English
arm against
EN
this
31