Tilt Adjustment; Height Adjustment - DURABLE 5083 Traducción Del Manual Original

Tilt adjustment

▶ see figure 10
– Should the monitor tilt by itself or become severely tilted, you
can configure the braking effect in the joint with the screw (13).

Height adjustment

▶ see figure 11
– Adjust the brake/spring effect of height adjustment with the
adjusting screw (3) in such a way that the swivel arm with the
monitor attached neither sags, nor springs upwards.
Note:
▶ see figure 12
In order to avoid injuries, the upper limb (I) of the swivel
arm moves upwards as soon as it is moved over the lower
limb (II).
WARNING!
Risk of product damage!
Do not move the swivel arm against this construction-de-
pendent resistance.
Exchanging monitor
▶ see figure 13
– Remove the cable clamps and monitor cable.
– Press the clamps of the VESA plate (1) together as shown and
lift the monitor out of the bracket (11).
– Release the VESA plate from the monitor and attach these as
described above to the new monitor.
EN
English
25