Meopta Meostar B1 Instruccion De Operación página 13

use of the binocular:
All manuals and user guides at all-guides.com
After taking the binocular out of its packing, remove the covers from the lens and the eyepiece cover. Before
viewing, disengage both ocular eye sockets by slight pulling and simultaneous turning in counterclockwise
direction. If you perform watching while wearing glasses, let the eye sockets withdrawn. Eye spacing can
be adjusted by turning the binocular bodies around the rotary central joint. Focusing of the binocular can be
carried out using the knob of central focusing – focusing knob. The right-hand part of the binocular can be
adjusted using the diopter correction knob if required. Zero correction setting is determined by alignment of
indices in a form of shaped projections on the knob and on the fixed ring. Consequent re-focusing to various
distances is to be carried out only using the focusing knob then.
In case of longer watching, the binocular can be mounted to a tripod using the thread connection W 1/4''
(a number of photographic and video tripods is provided with this thread) which will increase picture stability.
This mounting thread is positioned under black screwing cover visible in the middle between both lens, the cover
is provided with the sign "MADE IN CZECH REPUBLIC".
Keep the binocular clean. Clean the optical surfaces only if it is necessary, best by blowing with air from a ball
or by wiping with a fine cloth or a soft brush. Avoid impacts against hard objects and above all any drops.
Eyepieces are removable to enable utilization of other accessories.
caution: never aim the binocular at the sun when performing your watching. Permanent damage of
eyes may result even in case of a momentary glance at the sun disc.
11