Operating Modes - Fimar EASY LINE MF/914 Manual De Uso Y Mantenimiento

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MF/914 - MC/2425 MICROWAVE OVEN

OPERATING MODES

This microwave oven uses a modern electronic control system for operation of the various
cooking modes.
Operating and programming modes for the various appliance functions are listed.
Important
Notwithstanding the selected use and programming mode, the end of each process-
ing is shown by an acoustic alarm.
Before programming the new processing cycle, press button (H) to reset the equip-
ment.
Current time settings
1. Press button (F); the display (A) will show the hour "00:00" to set.
2. The display (A) will show the flashing hour digits that will have to be adjusted with se-
lector (L).
3. Press button (F) again to confirm the current hour, and carry out the same procedure to
adjust the minute digits.
4. After setting the time, both the hour and the minutes will stop flashing on display (A); this
means that programming was successful.
Kitchen timer
1. Press button (F) twice consecutively; display (A) will show the timer "00:00" to set.
2. Turn selector (L) to set the cooking time, up to a maximum of 95 minutes, and confirm
the setting with button (H). The countdown will start.
3. When the cooking time runs out, the acoustic signal will sound, and display (A) will show
the current time again.
Setting of the "Microwave oven" mode
1. Press button (B) to select the "Microwave oven" mode.
2. Repeatedly press the same button (B), or turn selector (L) to select the desired power
level (5 power levels).
3. Press button (H) to confirm the operation.
4. Turn selector (L) to set the cooking time, shown on display (A).
5. Press button (H) to confirm selection and start the cooking cycle.
Table 3: "Microwave oven" mode
Display
P100
P80
P50
P30
P10
- 13 -
Power level
100%
80%
50%
30%
10%
English language
EN