Connections; Connecting The Cables; Charging; Preliminary Settings - CefarCompex Rehab 400 Manual Del Usuario

2 - Connections

A) Connecting the cables
The stimulator cables plug into the 4
sockets on the base of the device. All 4
cables can be connected simultaneously.
Both the +/- buttons and the cables
are colour-coded to simplify use and
facilitate identification of the different
channels.
The kit includes four 2,1 mm pin-con-
nector cables.
B) Charging
The Rehab 400 is a portable muscle
stimulator powered by a rechargeable
battery unit.
Recharging
To recharge the Rehab 400, first discon-
nect the electrode cables from the
device, then plug the charger to a wall
socket and finally connect the stimulator
to the charger.
The charge menu illustrated below ap-
pears automatically.
1a 1b
1a: The stimulator has been charged for
7 minutes and 27 seconds (a full charge
may take 2-2,5 hours with the rapid
charger delivered with your device).
1b: Charging is in progress. When charg-
ing is completed, total charge duration
flashes and the battery symbol is com-
pletely full. The stimulator switches off
automatically as soon as you disconnect
the charger.

3 - Preliminary settings

Rehab 400
A) Language, contrast, volume
When you start the stimulator for the
first time, you will need to choose the
interface language you wish to use from
the options screen. See below for in-
structions on how to proceed. There are
a range of settings that you can adjust
to suit your needs (interface language,
display contrast, backlighting, volume).
To change any of these settings, bring up
the options screen by holding the On/Off
button on the front of the stimulator for
a few seconds.
3a
3b: Use the channel 1 +/- button to
choose the language you wish to use.
3c: Use the channel 2 +/- button to
adjust the contrast of the screen.
3d: Use the channel 3 +/- button to
adjust the volume.
3e: Use the channel 4 +/- button to
adjust the backlighting.
On: Backlighting always on
Off: Backlighting always off
Auto: Backlighting activated whenever a
button is pressed.
3a: Use the On/Off button to confirm
and save your choices. The settings will
be applied immediately.
3b 3c 3d 3e
ENG
11