Wiseup W5000 Guia Del Usuario página 2

3.1. POWER ON/OFF
3.1.1. Power on the camera by pressing the Power ON/OFF Button for 2 seconds.
The indicator light will illuminate red and blue for three seconds, and then turn off,
indicating the camera is recording video automatically.
3.1.2. Power off the camera by pressing the Power ON/OFF Button for 2 seconds.
The indicator light will blink red for 3 times and then go off.
3.2. VIDEO RECORDING
3.2.1. Power on the camera by pressing the Power ON/OFF Button for 2 seconds.
The indicator light will illuminate red and blue for three seconds, and then turn off,
indicating the camera is recording video automatically.
3.2.2. Press the Power ON/OFF Button twice in a row to stop recording video. The
indicator light will be solid blue, indicating the camera has entered into standby
mode automatically.
3.2.3. Press the Power ON/OFF Button once again to resume video recording. The
indicator light will go off.
[Note]:
1. The camera will save videos every 20 minutes automatically.
2. Video Format: AVI Video Resolution: 1920x1080P
3. It could save about 50 minutes' video for a 8GB flash memory.
3.3. VIDEO RECORDING IN IR NIGHT VISION MODE
3.3.1. Power on the camera by pressing the Power ON/OFF Button for 2 seconds.
The indicator light will illuminate red and blue for three seconds, and then turn off,
indicating the camera is recording video automatically.
3.3.2. Press the Mode Button for 2 seconds to enter into night vision mode and the
infrared LEDs will be turned on red. The indicator light will blink red for 3 times and
then go off.
3.3.3. Press the Mode Button twice in a row to exit night vision mode.
3.4. CAMERA/STILL PHOTOGRAPHY
3.4.1. Power on the camera by pressing the Power ON/OFF Button for 2 seconds.
The indicator light will illuminate red and blue for three seconds, and then turn off,
indicating the camera is recording video automatically.
3.4.2. Press the Power ON/OFF Button twice in a row to stop recording video. The
indicator light will be solid blue, indicating the camera has entered into standby