ClassicFlame 18E01 Manual Del Usuario página 2

I M P O R T A N T
1. Read all instructions before using this appliance.
2. This appliance is hot when in use. To avoid burns,
do not let bare skin touch hot surfaces. If provided,
use handles when moving this appliance. Keep
combustible materials, such as furniture, pillows,
bedding, papers, clothes and curtains at least 3 feet
(1m) from the front of this appliance.
3. CAUTION: Whenever the heater is left operating
and unattended, extreme caution is necessary if
children or invalids are nearby.
4. If possible, always unplug this appliance when not
in use.
5. Do not operate any heater with a damaged cord or
plug or after the appliance malfunctions, or if it has
been dropped or damaged in any manner.
6. Any repairs to this fireplace should be carried out
by a qualified service person.
7. Under no circumstances should this fireplace
be modified. Parts having to be removed for
servicing must be replaced prior to operating this
fireplace again.
8. Do not use outdoors.
9. This heater is not intended for use in bathrooms,
laundry areas and similar indoor locations. Never
locate this appliance where it may fall into a bath-
tub or other water container.
10. Do not run cord under carpeting. Do not cover
cord with throw rugs, runners or the like. Arrange
cord away from traffic areas and where it will not
be tripped over.
11. To disconnect this appliance, turn controls to the
off position, then remove plug from outlet.
12. Connect to properly grounded outlets only.
13. This appliance, when installed, must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the current CSA C22.1
Canadian Electrical Code or for U.S.A. installations
follow local codes and the National Electrical Code,
ANSI/NFPA NO. 70.
14. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause
an electric shock or fire, or damage the appliance.
15. To prevent a possible fire, do not block air intakes
or exhaust in any manner. Do not use on soft
surfaces, like a bed, where opening may become
blocked.
All manuals and user guides at all-guides.com
I N S T R U C T I O N S
16. This appliance has hot and arcing or sparking parts
17. Use this appliance only as described in the
18. Avoid the use of an extension cord because the
19. This heater is for use on 120 volts. The cord has a
SAVE THESE
INSTRUCTIONS
inside. Do not use it in areas where gasoline, paint
or flammable liquids are used or stored. This fire-
place should not be used as a drying rack for cloth-
ing, and Christmas stockings or decorations should
not be hung in the area of it.
manual. Any other use not recommended by the
manufacturer may cause fire, electric shock or
injury to persons.
extension cord may overheat and cause a risk of
fire. However, if you have to use an extension cord,
the cord must be No. 14 AWG minimum size and
rated not less than 1875 Watts. The extension cord
must be three wire cord with grounding type plug
and cord connection. The extension cord shall not
be more than 20 feet in length.
plug as shown at A. An adapter as shown at C is
available for connecting three-blade grounding-
type plugs to two-slot receptacles. The green
grounding plug extending from the adapter must
be connected to a permanent ground such as a
properly grounded outlet box. The adapter
should not be used if a three-slot grounded
receptacle is available.