OPERATION ________________________
Rechargeable battery
operation
When operating the appliance
7
with the built-in Li-Polymer bat-
tery, or the additional standby
battery pack, only use the
power adapter supplied for
charging.
Check that the voltage indicated
7
on the rating plate of the power
adapter corresponds to your
local power supply.
The power adapter has an auto-
7
matic 100-240 V ~ , 50/60 Hz
transformer which works any-
where in the world. This allows it
to comply with all international
AC voltages.
This model includes 2 inter-
7
changeable, especially pow-
erful and long-life Li-Polymer
batteries. One should be
inserted in the hair clipper, the
standby pack should be put
into the battery compartment of
charging stand.
Both batteries can be charged
7
at the same time. When the clip-
per and the is in use, standby
pack can still be charged.
20 ENGLISH
1
Switch off the appliance with the
On/Off switch
2
Insert the charging plug into
the charging stand and power
adapter into the wall socket.
– During the charging process,
the charge indicator LEDs
and
light up red.
F
– When the appliance is fully
charged, the charge indicator
LED
lights up green.
E
– When the second battery
(standby pack) is fully
charged, the charge indicator
LED
lights up green.
F
3
Pull the charging plug out of the
appliance socket and the power
adapter out of the wall socket.
Notes
Before first use charge up the
7
batteries completely for 24
hours. The charging time after-
wards is 3 hours (for the battery
inserted in the clipper) and 12
hours for standby pack (sepa-
rately in charging stand).
This appliance is designed to
7
charge and operate perfectly
between 15°C and 40°C.
If you switch on the appliance
7
while it is charging, charging
will be interrupted.
.
C
E