Manual Operation; Important - Breville The 3X Bluicer Pro Manual De Instrucciones

AUTO CLEAN
Use to remove most of the ingredients off
the blender walls and blades. Add 2 cups
(16 ounces) warm soapy water and press
the AUTO CLEAN button. For harder to
clean, sticky or thick ingredients, add ½
teaspoon of dish soap for extra cleaning
power. For best results, clean the blender
jug immediately after use. The Auto Clean
function only cleans the blender jug. It
doesn't clean the juicer.
FROZEN COCKTAIL
For creating ice-based cocktails and drinks
like Margaritas, Daiquiris and Slushies. An
ice crush program followed by a short blend.

MANUAL OPERATION

Speed Control Dial
BLENDING
Turn the Speed Control Dial clockwise to
select one of 10 speed settings from a slow
STIR (Speed Setting 1) through to a very fast
PULVERIZE (Speed Setting 10). The timer
will start to count up, and blending will stop
when it reaches '1:00'.
Blending can be paused by pressing pause
button. Press pause button again to cancel,
or turn dial to resume blending from
Speed 1.
To stop blending, turn the Speed Control
Dial counterclockwise back to READY or
press ON|OFF button.
COMPATIBLE WITH THE VAC Q™
The 3X Bluicer Pro is compatible with the
Vac Q vacuum pump. The Vac Q improves
texture, colors and flavors for some of
your blended mixes. For certain recipes
flavors will be greatly enhanced providing
smoother green smoothies, creamier
spreads, delicate dips and silkier gazpacho
soup. For milk based shakes, it's the air that's
whipped through and trapped into the shake
that gives that light and bubbly texture. The
Vac Q is sold separately.
12
BJB815_USCM_IB_E20.indb 12 BJB815_USCM_IB_E20.indb 12
JUICING
Wash your selection of fruit and vegetables
to be juiced. Most fruit and vegetables such
as apples, carrots and cucumbers will not
need to be cut or trimmed to size as these
will fit whole into the feed chute. Ensure
vegetables such as beets, carrots etc. have
all soil removed, are washed well and
trimmed of leaves before using.
1. Plug the power cord into your
120V power outlet.

IMPORTANT

Do not load feed chute with produce before
the Juicer has reached the selected speed.
Turning the Juicer On
2. Turn dial to desired speed setting. Use lower
numbers (1–5) for soft fruits and vegetables
and higher numbers (6–10) for hard fruits
and vegetables. See Speed Selector Guide
table on the next page to match speed and
produce type for maximum yield. "Low"
range, while it may not maximize yield
of some produce, allows you to extract
juice at a significantly lower noise level.
3. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract
the maximum amount of juice, always
push the food pusher down slowly.
4. Full Blender Jug
You can keep juicing until the jug is filled to
MAX. line.
25/9/20 2:28 pm 25/9/20 2:28 pm