Assembly
BEFORE FIRST USE
Wash the lid, inner measuring cup, jug, the
filter bowl surround, filter basket, juicer
cover, food pusher and pulp container in
warm, soapy water with a soft cloth. Rinse
and dry thoroughly.
Place motor base on a flat, dry surface such
as a countertop. Ensure that the appliance is
switched to OFF at the motor base and the
power cord is unplugged.
JUICING
1. Place filter bowl surround on
top of the motor base.
2. Align the arrows at the base of the
stainless-steel filter basket with the arrows
on the motor drive coupling and push down
until it clicks into place to create a secure fit
with the motor base.
8
BJB815_USCM_IB_E20.indb 8
BJB815_USCM_IB_E20.indb 8
3. Place the juicer cover over the filter bowl
surround, positioning the lower part of the
feed chute over the stainless steel filter
basket.
4. Raise the safety locking arm up and locate
into the two grooves on either side of the
juicer cover.
25/9/20 2:28 pm
25/9/20 2:28 pm