SEELEY INTERNATIONAL TBA Serie Manual Del Propietário página 9

DRAIN VALVE AND BLEED SYSTEM
This air cooler comes with an automatic
drain valve or an alternative simplified bleed
system.
AUTOMATIC DRAIN VALVE
If the drain valve was installed instead of
the alternative bleed system then your
cooler will automatically replace the water
during operation when the water salinity
becomes too high. This ensures the water
is always fresh and helps maintain your
cooler in good condition to ensure optimum
cooling performance. Alternatively and if
necessary, the air cooler can be set to
replace some water after a set time of
cooling operation. The frequency of the
automatic drain may have been adjusted by
your installer.
You can adjust the method of water
replacement with the following steps.
1.When the cooler is off, press and hold
2.While still pressing s , press
3.A number will display which corresponds to
the selected salinity control method as shown
in the table below.
Display Number Salinity Control Method
00
STANDARD
01
Press s or t to change the displayed
number to the desired salinity control
method.
POWER
4.Press to set your selection.
All manuals and user guides at all-guides.com
s .
COOL
.
Salinity Sensor
Timed Drain
SEELEY INTERNATIONAL – OWNER'S MANUAL 7