Alignment Of The Motion Detector - LIVARNO LUX LSLB 10 B2 Instrucciones De Uso

♦ Replace the cover of the connection box
place.
♦ You can now switch the power supply back on.
L N
Fig. connection diagram

Alignment of the motion detector

When aligning the motion detector
range does not include any undesired areas, such as streets or lights.
Ensure that no objects block the line of sight between the motion
detector and any possible trigger.
♦ Align the motion detector
♦ Undo the locking screw
cally.
♦ Align the motion detector
screw .
■ 32 │ GB │ IE
Brown or black wire (L)
Blue wire (N)
Green/yellow wire ( )
, make sure that the detection
horizontally by turning it.
to adjust the motion detector
and then re-tighten the locking
and screw it firmly into
verti-
LSLB 10 B2