Publicidad
Idiomas disponibles
Idiomas disponibles
Advance the tool very slowly when cutting curves or scrolling. Forcing the tool
may cause a slanted cutting surface and blade breakage.
Turn the tool on without the blade making any contact and wait until the blade
attains full speed. Then rest the baseplate flat on the workpiece and gently move
the tool forward along the previously marked line.
Pocket Cutting
When starting a cut from the center of a work piece, drill a 12mm diameter hole to
ensure that there is clearance for the blade.
8.Accessories
IMAGE
Wood
T144D
basic for
HCS
T118A
basic for Metel
HSS
9.Maintenance
Never use aggressive detergents or solvents for cleaning.
a.To prevent accidents, always unplug the saw from the power source before
cleaning or performing any maintenance the saw may be cleaned most effectively
using compressed air. Always wear safety goggles when using compressed air. If
compressed air is not available, use a brush to remove dust and chips from the
saw.
b.Motor ventilation vents and switch levers must be kept clean and free of foreign
matter. Do not attempt to clean by inserting pointed objects through open- ings.
c.Never use any caustic agents to clean plastic parts. Such as: gasoline, carbon
tetrachloride, chlorinated cleaning solvents, ammonia and household cleaners
containing ammonia. Do not use any of these to clean the saw.
d.Have an authorized service center examine and/or replace the worn carbon
brushes in the event of excessive parking.
e.Blades become dull even when cutting regular lumber, a sure sign of a dull blade
is the need to force the saw forward instead of guiding it while making a cut. Take
the blade to a service center for sharpening.
f.Keep the machine clean all the time.
.08.
DESCRIPTION
Wood Blade
Metal Blade
Owner's Manual & Safety Instructions
APPLICATION
Cutting for wood or other similar materials.
Cutting for soft metal or other materials.
JIG SAW
Publicidad
