Publicidad
Idiomas disponibles
Idiomas disponibles
JIG SAW
Owner's Manual & Safety Instructions
that cannot be controlled with the switch is dangerous and must be repaired.
c.Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d.Store idle power tools out of the reach of children and do not allow persons unfa-
miliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e.Maintain power tools. Check for misalignment or binding of moving parts, break-
age of parts and any other condition that may affect the power tools operation. If
damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g.Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5.Safety Warnings for Jig Saws
a.Hold power tool by insulated gripping surfaces, when performing and oper-
ation where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
b.Keep hands away from the sawing range. Do not reach under the workpiece.
Contact with the saw blade can lead to injuries.
c.Apply the machine to the workpiece only when switched on. Otherwise there
is danger of kickback when the cutting tool jams in the workpiece.
d.Pay attention that the base plate rests securely on the material while
sawing. A jammed saw blade can break or lead to kickback.
e.When the cut is completed, switch off the machine and then pull the saw
.03.
Publicidad
