Modecor Decojet A3 elite Manual De Usuario página 55

(e) cumplen los requisitos de declaración y composición establecidos en los capítulos II, III y IV del presente Reglamento.
Los materiales de la impresora y los cartuchos destinados a entrar en contacto con productos alimenticios han sido
sometidos a pruebas de migración global y se ha comprobado que cumplen con los límites establecidos en el artículo 12,
apartado 1, del Reglamento (UE) n.º 10/2011.
ARTÍCULO 12
Límite de migración global
1. Los materiales y objetos plásticos no deberán transferir sus constituyentes a los simulantes alimentarios en cantidades
superiores a 10 mg de constituyentes totales liberados por dm2 de superficie de contacto con los alimentos (mg/dm2).
To all customers using Modecor food printers
Food printers, as an equipment whose components (drive rollers in particular) come into contact with edible products
(wafer sheets, sugar paste, etc.), and cartridges containing food inks, have been subjected to laboratory tests to guarantee
consumer safety in terms of migration of the components to food.
There is no specific European legislation for food printers or cartridges, but there are European regulations concerning
food contact machines and food contact materials that must be complied with.
Modecor, in order to prevent any controversy with control organs and for the protection of the consumer, has always
adapted and respected the following regulations that for your knowledge we recall below:
DIRECTIVE 2006/42/CE - MACHINERY DIRECTIVE -
ART. 21.1 FOOD MACHINERY AND MACHINERY FOR COSMETIC OR PHARMACEUTICAL PRODUCTS
General considerations
Machinery intended for use with edible products, or cosmetic or pharmaceutical products must be designed and
constructed to avoid any risk of infection, sickness, or contamination.
Art. 1.7.3 Marking of machinery
Each machine must bear, legibly and indelibly, at least the following particulars
•
name of manufacturer
•
the CE marking
•
designation of series or type
•
where appropriate, the serial number
(**) Framework Regulation 1935/2004 MATERIALS AND OBJECTS INTENDED TO COMBAT FOOD PRODUCTS
ARTICLE 3 (EC Regulation 1935/2004)
General requirements
1. Materials and articles, including active and intelligent materials and articles, shall be manufactured in compliance with
good manufacturing practice so that, under normal or foreseeable conditions of use, they do not transfer their
constituents to food in quantities which could:
(a) constitute a danger to human health;
(b) bring about an unacceptable change in the composition of the edible product; or
(b) bring about an unacceptable change in the composition of the food;
or
(b) bring about an unacceptable change in the composition of the food; or organoleptic characteristics.
2. The labelling, advertising and presentation of a material or article shall not mislead consumers.
(***) REGULATION (EU) No 10/2011 on plastic materials and articles intended to come into contact with
food
ARTICLE 4
elite
Decojet A3
55