Hyundai HA211 Guía Para El Usuario página 10

4. Systolic/Diastolic and Pulse Values, all of the measured values will be displayed on the LCD panel.
5. Release cuff from your arm while the cuff deflates completely.
6. To measure 2nd person, after pressing Power and blinking digit stops, press Page, the number 2 will appear, press Start
5. To see the previous measured values.
The main unit automatically stores the previous measured values.
(Even after batteries are replaced, the Previous values are stored in 1 minute.)
1. Press "MEMO" button, you can recall previous measured values for the first person.
2. If you press "MEMO" button successively, you can read next values.
3. Press "PAGE" button, then you can read second person measured values.
4. Stored capacity is up to 30 sets each page.
6. To finish the measurement
1. After deflation, the measurement of blood pressures is completed.
If you want to measure again, just press "START" button again.
Note: We suggest waiting 10 minutes for re-measurements.
All manuals and user guides at all-guides.com
-6-