Electrical Connection; Extension Lead; Guarantee; Important Warnings - Blastrac BDC-1133PM Manual Original

D
BLASTRAC BDC-1133PM / BDC-1133PH / BDC-1133PHC
GB
carried out by authorised personnel wearing suitable
F
personal protection. Operate only after the full filtra-
tion system has been fitted and checked.
NL
For dust extractors, ensure adquate air change rate,
when the exhaust air is returned to the room. Ob-
I
serve national regulations before use.
For Dust Class M machines (with type designation
N
PM) following applies:
The appliance is suitable for picking up dry, nonflam-
S
mable dust, non flammable liquids, sawdust and
hazadous dusts with OEL values > 0.1 mg/m³.
DK
SF
> 0.1 mg/m³ as well as saw dust. The machine is
E
tested in its entirety by vacuums for this dust class.
The maximum degree of permeability is 0.1 % and
P
the disposal must be low dust.
For dust extractors, ensure adquate air change rate,
GR
when the exhaust air is returned to the room. Ob-
serve national regulations before use.
TR
1.4

Electrical connection

SLO
It is recommended that the machine should be con-
nected via a residual current circuit breaker.
HR
Arrange the electrical parts (sockets, plugs and cou-
plings) and lay down the extension lead so that the
SK
protection class is maintained.
Connectors and couplings of power supply cords
CZ
and extension leads must be watertight.
PL
1.5

Extension lead

H
As an extension lead, only use the version specified
by the manufacturer or one of a higher quality.
RO
When using an extension lead, check the minimum
cross-sections of the cable:
BG
Cable lenth
RUS
up to 20 m
20 to 50 m
EST
1.6

Guarantee

LV
Our general conditions of business are applicable
with regard to the guarantee.
LT
Unauthorised modifications to the appliance, the use
of incorrect brushes in addition to using the appli-
JA
ance in a way other than for the intended purpose
exempt the manufacturer from any liability for the
ZH
resulting damage.
KO
TH
MS
16
Dust Class M (IEC 60335-2-69).
The dusts which belong to this
class are: dusts with OEL values
Cross section
< 16 A < 25 A
1.5 mm 2 2.5 mm
2.5 mm 2 4.0 mm
1.7

Important warnings

WARNING
To reduce the risk of fire,
electric shock, or injury,
please read and follow all
safety instructions and caution
markings before use. This ma-
chine is designed to be safe
when used for cleaning func-
tions as specified. Should
damage occur to electrical or
mechanical parts, the machine
and / or accessory should be
repaired by a competent ser-
vice center or the manufactur-
er before use in order to avoid
further damage to the machine
or physical injury to the user.
Do not leave the machine
when it is plugged in. Unplug
from the socket when not in
use and before maintenance.
Outdoor use of the appliance
shall be limited to occasional
use.
2
2
Do not use with damaged cord
or plug. To unplug grasp the
plug, not the cord. Do not han-
dle plug or machine with wet
hands. Turn off all controls be-
fore unplugging.
Do not pull or carry by cord,
use cord as a handle, close
a door on cord, or pull cord
*) Optional accessories / Option depending on model
Original instruction