Spare Parts And Accessories; In Explosive Or Inflammable Atmosphere; Control / Operation; Starting And Operating Of The Machine - Blastrac BDC-1133PM Manual Original

2. Use the closable plastic
sack to ensure dust-free
transport of the appliance
and contaminated parts
(hose, hand pipe, nozzles,
etc.).
Once the asbestos appliance
has been used in an exclusion
area as defined in TRGS 519,
it should no longer be used in
so-called "white" areas. Ex-
ceptions are only permitted
if the asbestos cleaner has
previously been completely
decontaminated by a special-
ist as specified in TRGS 519
No. 2.7 (e.g. not only the outer
case but also, for example, the
cooling air rooms, the installa-
tion rooms for electrical sup-
plies, the supplies themselves,
etc.). A written report must
be made by a specialist and
signed by him.
When picking up materials
containing asbestos the ex-
haust air must not be returned
into the room.
1. Use the exhaust air socket
and a hose with a length of
maximum 4 m and a nomi-
nal diameter of minimum
50 mm.
*) Optional accessories / Option depending on model
Original instruction
BLASTRAC BDC-1133PM / BDC-1133PH / BDC-1133PHC
2.3

Spare parts and accessories

CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or func-
tion of the appliance.
1. Only use original spare parts and accessories
from Blastrac/Diamatic. Spare parts that can
affect health and safety of the operator and or
function of the appliance, are specified below:
Description
Flat filter PTFE, 1 pcs.
Dust Class H/HEPA filter, 1 pcs
Fleece filter bag, 5 pcs
Disposal bag plastic, 5 pcs
Safety filter bag, 5 pcs
Motor cooling air filter PET, 1 pcs
2.4

In explosive or inflammable atmosphere

CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced by the
presence of volatile liquid or inflammable gas or va-
pour.
3

Control / Operation

CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains voltage.
1. Ensure that the voltage shown on the rating plate
corresponds to the voltage of the local mains
power supply.
3.1

Starting and operating of the machine

1. Check that the electrical switch is switched off (in
position 0).
2. Check that suitable filters are installed in the ma-
chine.
3. Connect the suction hose into the suction inlet at
the machine by pushing the hose forward until it
fits firmly in place at the inlet.
GB
DK
Order No.
CFA1133-FT-M
M
CFA1133-FT-HC
CFA107418855
CFA107418856
CFA107418857
GR
CFA1133-ASB-2
HR
SK
RO
BG
RUS
KO
MS
19
D
F
NL
I
N
S
SF
E
P
TR
SLO
CZ
PL
H
EST
LV
LT
JA
ZH
TH