Waeco EasyCool EC-1500-AC Instrucciones De Montaje Y Uso página 52

ec_1500_2000.book Seite 52 Freitag, 12. Mai 2006 4:11 16
Installation
The roof of the vehicle can be reinforced (e.g. with a wooden frame) if the
load-bearing capacity of the roof is insufficient.
➤ Position the roof air conditioner over the installation opening.
5.2.7 Attachment of the device
– see Fig. 7 on page 5 –
➤ Fit the fastening frame (see Fig. 7 on page 5, B) using the fastening
screws supplied (4xM8x100 hex screws) and the U washer (4xM8).
The supplied hexagon bolts (4 x M8 x 100 mm) can be used for up to
70 mm thick roofs. Hexagon bolts (quality class 8.8) which are
appropriately longer must be used for other roof thicknesses.
Apply screw locking devices to the fastening screws.
Adhere to the specified fastening torque.
➤ Tighten the screws using a torque spanner and a fastening torque of
(3 Nm) 0.3 kgm.
➤ Fasten the cover frame (see Fig. 7 on page 5, C) using the 4 countersunk
screws provided (Ø 4.8 x 25).
Only for AC/DC versions: Complete the installation by installing the
inverter (refer to the "Inverter" section on page 58) and the charging
current distributor (installation and operating manual included in the scope
of delivery).
52
All manuals and user guides at all-guides.com