SINCO SF 6713 Manual Del Usuario página 7

Blade cap
Guard Nut
Screw blade cap on shaft by tuming counter clockwise
Rear grille
Shaft
Put front grille on rear grille and close clips or screw grille
ring to secure grilles together
WARNING:
1. If the supply cord is damaged, it must bereplaced by the manufacturer or its serice
anent or similarly qualified persons in order to avoid a hazard.
2. To reduce the risk of fire or electric shocked not use this fan with any soild- stade
speed control device.
3. This appliance is not intended for use by children or other persons without assistance
or supervision if their physical, sensor yor mental capabilities prevent them from using
it safely. Children should be supervised to ensure that they do not play with the appliance.
4. Ensure that the fan is switched off from the supply mains before removing the guard.
5. It is the end user's responsibility to use this product in an appropriate manner: the
supplier/importer/distributor takes no responsibility should any injury be caused-loss
or damage of property, serious injury or death
Unscrew the blade cap by turning clocwise & rear
guard mounting nut by turning counter clockwise
Put rear grille on motor shaft and secure with guard nut
Blade
Slide blade on motor shaft
- 6 -
Blade cap
Front grille