Function Description; Safety Functions; Important Instructions For Use; Operation - therm-ic PowerPack BasicKids Modo De Empleo

FUNCTION DESCRI P TION
The PowerPacks BasicKids have two operating
modes: POWER OFF - IN USE
These modes are clearly indicated on the
PowerPack status display (red LEDs).
Each PowerPack can be individually set to one of
three different heat levels.
SAFETY FUNCTI O NS
PowerPack BasicKids and Kids insoles (blue
connector) have been adapted to each other in
terms of the heat level and exposure time. Using
them in combination with standard Therm-ic insoles
(red connector) leads to a reduction in exposure
time and an increased heating temperature which is
unsuitable for children (see Heat level table).
For this reason only use PowerPacks BasicKids
together with ThermicSoles Kids.
11
I MPORTANT I NSTRUCTIONS FOR USE
 Insert the batteries into the housing as illustrated.
It is imperative to observe the proper polarity of
the batteries. Clean the contacts of the battery
and the device if necessary before insertion.
 Close the battery housing and plug in the heating
element cable all the way until a click is felt.
 When starting up, do not allow step 3 to be
switched on longer than a few minutes in each
case, otherwise too much heat can be produced
during operation – danger of burning.
 Always set PowerPacks to level 1 or 2 to maintain
a comfortable level of warmth for your feet
(heating should be almost undetectable).
 The optimum heat output is achieved when your
shoes and soles are dry.
O P E RA TI O N
The PowerPack BasicKids features a status display
(1.1) with 3 LEDs for indicating the heat level. Use