Getting Started - Parrot MKi9100 Guía De Instalación Rápida

• If you want to place the remote control on the dashboard,
stick the double-sided tape located on the flat side of the
bracket to fix it against the dashboard. You can then insert
the remote onto the bracket.
Once you have stuck the support on the dashboard,
wait for approximately 2 hours to make sure the
adhesive tape adheres well.
Installing the microphone
• Make sure the microphone is installed as close to the
mouth of the user as possible. The ideal distance is 60 cm.
The best possible location for the microphone is near the
rear-view mirror.
• The microphone needs to be pointed towards the user.
Installing the screen
Install the screen in an easily accessible and visible location.
Do not install the screen in the airbag deployment area or in
a possible head impact area.
Once you have stuck the support on the dashboard,
wait for approximately 2 hours to make sure the
adhesive tape adheres well.
16
All manuals and user guides at all-guides.com
► Diagrams p.8.
► Diagrams p.12.

Getting started

Associating the control unit with the remote control
If the remote control does not seem to be associated to the
electronic box while using the Parrot MKi9100:
• After verifying the CR2032 battery is properly inserted in
the remote unit, press and hold the Play and green but-
tons, then press the red button several times. This has to
be done when you see the "Parrot MKi9100" Logo on the
display screen.
• Within 1 to 2 seconds, you should then see a "Pairing
Remote Control" message displayed on the screen. At that
time, you can release the buttons and the remote should
then be paired with the kit and the message will go away.
You can verify remote operation by navigating through the
menus.
• If you are unsuccessful on the first attempt, power off the
unit until you see the "Goodbye" message, power it back
on, and repeat the process.
Selecting the language
While using the Parrot MKi9100 for the first time, use the jog
wheel to browse through the available languages and press
the jog wheel to confirm your selection.