Kohler K-14402 Manual Del Usuario página 6

Stopper
Stopper Nut
Body Nut
Rod
Seal Hole
Apply Thread
Sealant.
4. Complete the Drain Installation-Style A
Insert the stopper into the flange.
Remove the body nut from the seal hole.
Insert the short end of the rod into the seal hole and under the
stopper. Loosely secure in place with the body nut.
Remove and adjust the stopper so it lifts approximately 3/8" (1
cm) when opened. To adjust, loosen the stopper nut and shorten
or lengthen the stopper as needed.
Tighten the stopper nut.
Hand tighten the body nut.
Apply three layers of sealant tape plus a small bead of pipe
sealant to the tailpiece threads.
Thread the tailpiece to the body and hand tighten securely.
Slide the rod through one end of the clip and the appropriate
hole in the link. The thumbscrew should face toward the back of
the lavatory.
Run the rod through the other end of the clip.
1032026-2-C
All manuals and user guides at all-guides.com
Body
Clip
Rod
Tailpiece
6
Thumbscrew
Link
Kohler Co.