Spare Parts List - Cembre SD-10E-110 Manual De Uso

7. STORING THE DRILLING MACHINE
After completion of the work, proceed as follows:
7.1) Carefully clean the machine, removing all wood shavings.
7.2) Clean the return spring shafts and lubricate if necessary (See § 6.1.1).
7.3) For ease of transportation, to prevent accidental damage and to keep the machine dry,
use the recommended steel storage case; ref. VAL SD (See § 3.5); which can also house the
detachable guard and the VAL P6 accessory case.

8. SPARE PARTS LIST

Code No Item
6001422 01 Brush
- 02 Electric plug
- 03 Automatic switch
6001522 04 Handle grip
6002522 05 Main handle
6001661 06 Grip
6001647 07 Operating switch
- 08 Electric motor
6001539 09 Spindle/Emergency release lever
6001541 10 Release pin shaft
6001502 11 Spindle body
6001503 12 Spindle shaft
6700050 13 Circlip
6001494 14 Locating pin
6340140 15 M 8x8 grub screw
The guarantee is void if parts used are not Cembre original spares.
When ordering spare parts always specify the following:
- Code number of item
- Description of item
- Type of drilling machine
- Drilling machine serial number
9. RETURNING THE DRILLING MACHINE TO
In the case of a breakdown contact our Area Agent who will advise you on the problem and
give you the necessary instructions on how to dispatch the machine to to our nearest service
Centre; if possible, attach a copy of the Test Certificate supplied by Cembre together with the
machine or, if no other references are available, indicate the approximate purchase date and
the machine serial number.
11
(See Fig. 6)
DESCRIPTION Qty Code No Item
2 6001527 16
2870290 17
1
1 - 18
1 2870279 19
1 6001529 20
1 6001493 21
1 6001492 22
1 6001532 23
6003263 24
1
1 6740120 25
1 6520280 26
1 6760344 27
1 6002133 28
1 6002081 29
1
FOR OVERHAUL
Cembre
ENGLISH
DESCRIPTION
Spindle guide
MND spindle
TPM... end piece
PRM-U detachable guard
Guard retaining nuts
Fixed guard
Spring shaft
Guard return spring
Adjusting flange
Ball
Spring
Split pin Ø 6x10
Spigot
Nut
Qty
1
1
1
1
2
1
2
2
1
2
2
2
1
1