Battery Installation - memorex MMP8567 Manual Del Usuario

Tabla de contenido

Idiomas disponibles

When the bars in the battery indicator (in the display) become low (see Figure 1),

replace the battery as follows.

1. Remove the top cover by pressing the

Open button, then lifting the top cover

up to remove it as shown in Figure 2.

2. Insert one (1) "AAA" battery (positive

side facing the bottom of the unit and negative side facing the top) as shown

in Figure 3, making sure to close the battery latch (press down the battery

latch and slide the latch until it locks in place). An alkaline battery is

recommended

for the longest

playing time.

3. Put

the

cover back on

until it snaps in

place.

NOTE: Each time after you have replaced the battery, when you turn on the unit again, it

will search the music files to update the index. It will take approx. several seconds to update

the index; this updating time depends on the number of music files in the SD/MMC card and

in the internal memory.

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery speciﬁed.

2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed

batteries may cause damage to the device.

3. If the device is not to be used for a long period of time, remove the battery to prevent damage

or injury from possible battery leakage.

4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

(Follow battery manufacturer's directions.)

All manuals and user guides at all-guides.com