Dell PowerVault 130T Guia De Instalacion página 10

1-8 Dell PowerVault 130T Storage System Rack Kit Installation Guide
All manuals and user guides at all-guides.com
cage-nut tool
Figure 1-6. Installing the Cage Nuts
2. Push in on the cage nut while rotating the tool up and pulling it toward you until
the top lip of the cage nut snaps into position (see Figure 1-6).
3. Repeat steps 1 and 2 to install the remaining cage nuts.
Installing the PowerVault 130T System
Use the following procedure to install the PowerVault 130T system in the rack.
WARNING: If you are installing more than one PowerVault 130T system in
a rack, install the first PowerVault 130T system in the lowest position in the
rack. Never pull more than one PowerVault 130T system out of the rack at
a time.
WARNING: Due to the size and weight of the PowerVault 130T system,
never attempt to lift the PowerVault 130T system by yourself.
1. Lift the PowerVault 130T system onto the adjustable rails.
2. Push the PowerVault 130T system so that it slides along the adjustable rails until
it is seated against the front vertical rails of the rack (see Figure 1-7).
cage-nut