Dell PowerVault 130T Guia De Instalacion página 13

All manuals and user guides at all-guides.com
10-32 x 0.5-inch flanged
Phillips-head screws (4)
Figure 1-9. Securing the PowerVault 130T System to the Rack
6. Replace the PowerVault 130T system door by aligning the door hinges with the
hinges on the system enclosure. Insert the hinge pins and push them all the way
down (see Figure 1-8), securing the door.
7 . Close the front door of the PowerVault 130T system.
Replacing the Doors on the Rack
Use the following procedure to replace the rack's front and back doors.
WARNING: To prevent personal injury due to the size and weight of the
doors, never attempt to replace the doors by yourself.
1. Lift the front door into position, and align the hinges with the holes in the rack as
shown in Figure 1-3.
2. Slide the hinges into the holes in the rack until the hinge release levers lock the
hinges into position.
3. Close the door latch by rotating the handle counterclockwise until it stops, push
the handle in until it locks in position, and then slide the push button cover down
over the push button (see Figure 1-2).
4. Repeat steps 1 through 3 to install the back door.
Dell PowerVault 130T Storage System Rack Kit Installation Guide 1-11