Omega Cold Press 365 TWN30 Serie Manual Del Usuario página 10

QUICK START ASSEMBLY
3. When juicing, place juice bowl and pulp bowl under drum set.
Plug power cord into wall outlet.
4. Press the ON button. Place a few pieces of cut fruit or vegetables, one at a time into
the guide. Use the food pusher to press the fruit or vegetables gently down the guide.
Leave the machine on as you feed in the fruits / vegetables.
5. Do Not place any metal objects into the hopper. If the drum set is clogged or the
machine stops operating, press the reverse button 2 to 3 times which will clear the
clogging. Press the ON button again to resume normal operation.
6. Switch the juicer OFF before changing accessories or touching any moving parts.
Remove the drum set from the main body by turning the locking clip counter-clockwise.
Pull the auger forward to disassemble it from the drum set.
After juicing, wash all parts in warm soapy water.
Do NOT place any of the juicer accessories in the dishwasher.
7. Do NOT run juicer for more than 30 minutes continuously at any one time.
Twin Gear Auger
2nd Gear Point
Make sure indicated parts
are properly aligned when
combining the clean twin gears.
Failure to align properly may
lead to product malfunct ion
and excess noise generation.
Feed Shoot
1st Gear Point