Intended Use; General Safety Instructions - Atlas Copco SML MK II Serie Información Sobre Seguridad

Safety Information
Signature of issuer
Authorized Representative UK:
Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead, Hertfordshire HP2 7EA
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
Read all Safety Information delivered together with
►
the different parts of the system.
Read all Product Instructions for installation, opera-
►
tion and maintenance of the different parts of the
system.
Read all locally legislated safety regulations regard-
►
ing the system and parts thereof.
Save all Safety Information and instructions for fu-
►
ture reference.

Intended Use

This product is designed for holding power tools within the
specified load / torque capacity. No other use permitted.
Product Specific Instructions
Special precautions for WP Balancer
1.
Secure the drum lock,
tighten the lock screw on the balancer.
2.
Remove the load.
3.
Secure the load.
4.
Release the drum lock,
release the lock screw on the balancer.
Labels on the balancer
4 © Atlas Copco Industrial Technique AB - 9836 6443 00

General safety instructions

Additional safety information regarding portable air
tools:
• CAGI 2528 - B186.1, SAFETY CODE FOR POR-
TABLE AIR TOOLS, available from Global Engi-
neering Documents at https://global.ihs.com/ or call
+1 800 447-2273. In case of difficulty in obtaining
ANSI standards, contact ANSI via https://
www.ansi.org/
Installation hazards
• Mount the torque arm bracket / support securely. Ensure
the torque arm support has a minimum safety factor of
five times the combined maximum load capacity plus
torque arm weight.
• When using a balancer with the torque arm:
• Ensure that the balancer suspension support has a mini-
mum safety factor of five times the combined maximum
load capacity plus balancer weight.
• Attach an additional support cable or chain to another
support independent of the one holding the balancer.
• Examine the suspension hooks, cable and chain for wear.
Replace any worn parts before installation.
• Check that the tool holder is securely tightened before
operating the torque arm or tool.
Operating Hazards
• Do not exceed the recommended load or torque capacity
ranges.
• Operators must be physically able to manoeuvre the
torque arm. If you are unfamiliar with the torque arm,
adjust the tool to a low torque setting the first time you
operate it.
• Daily examine the torque arm attachment and all struc-
tural parts for wear or cracks. Replace the entire arm if
extensive wear, damage or cracks are detected.
• Do not operate the torque arm if damaged or malfunc-
tioning.
SML MK II