Cutting Height Adjustment; Operating; Grass Box Assembly; Grass Box Removal - MADER TZ51SF-BS625EXi Manual De Instrucciones

E-Cutting height adjustment
The cutting height adjustment lever is situated above the right rear wheel.
To adjust the cutting height, pull the height adjustment lever out and away
from the lawnmower and move forward or backwards into another slot
depending whether you want it to cut shorter (low) or longer (high).
For rough and uneven lawns, move the height adjuster to a higher position as this
NOTE
will stop scalping.

OPERATING

KEEP HANDS AND FEET AWAY FROM THE REAR DISCHARGE
ON THE STEEL DECK
A- Grass box assembly
Put the metal frame inside the grass collector. Few the bag onto the
frame securely. Lift the back cover and attach the grass collector in
place, on rear of the mower.
B- Grass box removal
Release the OPC/Operators Presence Control handle and wait for the blade to stop rotating.
Lift the back cover and remove the grass collector from its in place.
Release the rear flap / deflector. Empty the clippings
STOP the engine before fixing the mulching plug or before removing it.

How to fix the mulching plug

C-
Remove the collection bag.

Lift the rear flap and insert the mulching plug in the grass evacuation channel (picture A).

As soon as properly fixed, release the rear flap on the mulching plug (picture B)

To remove the mulching plug, lift the rear flap, remove the plug, fix the collection bag et release the flap

on the bag.

（for TZ51SF-BS625EXi）
11