Before Brewing; Initial Cleaning; Making Coffee; With Whole Beans - Cuisinart Grind & Brew DGB-2 Serie Manual De Instrucciones

BEFORE BREWING YOUR
FIRST CUP OF COFFEE

INITIAL CLEANING

Perform an initial cleaning before making
your first beverage. Follow the instructions
below without inserting a pod.
1. Remove the reservoir from the unit.
2. Fill the reservoir and replace back into
the unit.
3. Plug the power cord into an
independent outlet. Press the Power
button to turn the unit on.
4. Open and close the brew head. Do not
add a capsule.
5. Place a mug on the drip tray.
6. Press the 10 oz. Brew Size button to
begin the brew cycle. The selected
indicator will start breathing and the
hot water will start to dispense
momentarily.
7. When the one-time cleaning process
is complete, discard the hot water.
Your brewer will now be ready to use.

MAKING COFFEE

WITH WHOLE BEANS

Follow instructions in "Before Brewing Your
First Cup of Coffee."
GRINDING INTO
THE HOMEBARISTA
1. Remove the bean hopper lid and
add beans.
NOTE: The hopper holds up to
100 g of beans. The sealed lid keeps
them fresh.
2. Open the lid of the HomeBarista
Reusable Filter Cup and insert into the
holder below the grinder.
3. Press the Power button to turn on the
unit. The Power and Grind indicators
will illuminate.
4. Press the Grind button to start the
grind process. The grinder is set to
automatically turn off once the
HomeBarista
is full.
7
®
Reusable Filter Cup
®
®