Troubleshooting Guide; Care And Maintenance - Panacom PA-7540 Manual Del Usuario

All manuals and user guides at all-guides.com
Before the phone is put in service, you can turn the dialing mode
switch to Pulse (P) or Tone (T) position to be set in accordance with
the dialing method used by your local public telephone exchanger:
NOTE:
T(tone):dual-tone multi-frequency dialing(DTMF)
P(pulse):pulse dialing
Default: Tone position.
• VOLUME RINGER SWITCH
You can adjust the VOLUME OF THE RINGER through the slide on
the side of the base unit. Switch to 'LO'(low volume), 'HI' (high vol-
ume) position or OFF (no ringer)
• WALL MOUNTABLE
Install the wall mounting adaptor according to the indication on the
bottom of the phone base.
Use a 6 mm drill and 27mm screw to hook when wall mounted.

TROUBLESHOOTING GUIDE

Problem: Called party hears no or weak voice.
Solution: Check the handset and cord connection
Problem: No function
Solution: Unplug the phone, disconnect all cords and reinstall the
phone as written in the manual
Problem: No ringing or dial tone
Solution: Check the line cord connection.
Solution: Check the handset cord connection.
Solution: Check if the telephone line or PABX line is working.
Problem: One ring only and the line is broken
Solution: Check the jumper box.
Solution: Check if there are parallel units on the same line if so re-
move them.

CARE AND MAINTENANCE

To keep Your Panacom PA-7540 phone working and looking good,
follow these few simple guidelines:
• Avoid putting telephone near heating appliances and devices that
Pg. 5