Troubleshooting Guide; Care And Maintenance - Panacom PA-7580 Manual Del Usuario

Default: Tone position.
VOLUME RINGER SWITCH
You can adjust the volume of the ringer through the slide on the side
of the base unit. Switch to 'LO'(low volume),"MED" (medium volume)
or 'HI' (high volume) position.
WALL MOUNTABLE
Install the wall mounting adaptor according to the indication on the
bottom of the phone base.
Use a 6 mm drill and 27mm screw to hook when wall mounted.

TROUBLESHOOTING GUIDE

Problem: Called party hears no or weak voice.
Solution: Check the handset and cord connection
Problem: No function
Solution: Unplug the phone, disconnect all cords and reinstall the
phone as written in the manual
Problem: No ringing or dial tone
Solution: Check the line cord connection.
Solution: Check the handset cord connection.
Solution: Check if the telephone line or PABX line is working.
Problem: One ring only and the line is broken
Solution: Check the jumper box.
Solution: Check if there are parallel units on the same line if so re-
move them.

CARE AND MAINTENANCE

To keep Your Panacom PA-7580 speakerphone working and looking
good, follow these few simple guidelines:
• Avoid putting telephone near heating appliances and devices that
generate electrical noise. (i.e., motors, fluorescent lamps.)
• Telephone should not be exposed to direct sunlight or moisture.
• Avoid dropping the handset and other rough treatment to the phone.
• Clean telephone with a soft cloth. (Remember to first unplug the
phone from the wall outlet.)
• Never use a strong cleaning agent or abrasive powder, as this can
Pg. 7