Description Of Components - Cofem ZAFIRPWS2 Manual

2

Description of components

Power supplies ZAFIRPWS2 / 5 are composed by the following elements:
2.1. Box (360 x 326 x 85 mm): It has space for batteries and switching power.
2.2. Label holder: It is fitted to the upper frontal part of the box. It serves as a support for
the control circuit in the rear side, and for the label on the outside. It
has a ground cable connecting closest pin to the axe of rotation with another pin sited
insed the box or faston.
2.3. Door (368 x 336 mm): which is the fox by 4 front bolts near the corners (Letter C figure
1).
2.4. Cover: figure 6.
2.5. Control circuit: fixed to the back of the label holder, it contains the terminal
connections poking out below the label holder.
2.6. Batteries: the control panel has reserved space at the bottom of the box. Supports up
to 2 batteries 12V 7Ah.
2.7. Switching power: it is fixed to the bottom of the box in the top center behind the label
holder.
C
C
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - cofem@cofem.com - www.cofem.com
Power supply
ZAFIRPWS2/5
C
C
Figure 1: door dimensions and central chest (mm).
FIRE PROTECTION MANUFACTURER
B B
A
B B
A A
13